Connecting The System (cont.)
Microphone
The microphone cable or extension cable plugs into the microphone connector on the rear of the
T7000. Fully insert the plug into the connector.
Testing the Microphone
To test the microphone, it is necessary to pair a cell phone to the system. Refer to the Phone
Pairing section of the Users Manual for this procedure. Once a phone is paired, proceed with the
following steps:
1. With the unit on (refer to the previous section "Testing for Proper Connection of Power
and Speakers" for steps to turn the system on), push the Microphone button
on the front of the T7000. A tone will be heard and the message "Please Talk Now" will
be displayed on the screen
2. Speak clearly and say "Call" or "Dial" and the phone number 5-5-5-1-2-1-2. When
speaking the number, be sure to say each digit individually. In other words, say "Call 5 5
5 1 2 1 2", not "Call 5 5 5 twelve twelve".
3. After a short period of silence, the T7000 will speak what it believes it heard and ask for
confirmation that the number is correct. If the system has responded to your voice input,
the microphone is working correctly.
iPOD Dock
Connect the iPOD dock cable to the rear of the T7000, firmly seating the connector into the iPOD
designated connector.
Testing the iPOD dock
With the unit on (refer to the previous section "Testing for Proper Connection of Power and
Speakers" for steps to turn the system on), connect an iPOD to the dock. The T7000 will
automatically recognize the iPOD connection and change screens to the iPOD audio screen. This
indicates that the iPOD dock is connected correctly and working properly.
15
located