Bracket Mounted Side Cameras - Lectronix T7000 Installation Instructions Manual

Mounting Cameras (cont.)
For the camera cable, drill a 13mm (or ½" minimum) hole to give enough clearance for the
connector to slip through. Use a rubber grommet to protect the cable. Split a grommet and slip it
over the camera cable then into the hole of the mounting surface. Once the camera base is
mounted, seal the camera cable hole with silicon caulking to prevent water and road dirt from
coming into the camera housing. The caulk should be applied to the top side of the base and
completely fill the hole in the base where the cable passes through.
Fender Mounted Camera Example

Bracket Mounted Side Cameras

If a bracket is needed to mount the side camera, fabricate an appropriate bracket for the
application and attach the camera to it as detailed above. The pictures below show examples of
bracket mounted camera applications.
Bracket Mounted Camera Examples
6