4.2.4 CPU Board Detection Enable / Disable(J2)
This header lets you set your CPU board detection function. You can choose enable or disable this function.
If you don't use processor in CPU board, you have to set this jumper off.
4.2.5 External SAS Port Enable/Disable(JP2)
This header lets you set your External SAS port Enable/Disable function. You can choose enable or disable this
function.
4.2.6 Geographical ID Setting
ID switch is used to decide identification, CPU number and type of server.
ServerDome is monitoring on the basis of identification, CPU number and type of server.
CAUTION
You have to install the ID switch before BMC F/W update.
ON
Enable
Disable
ON
Disable
Enable
OFF
OFF
54