Advertisement
I
NTRODUCTION
The following instructions explain how to complete a DriveR-
ight VSS (Vehicle Speed Sensor) installation. VSS installation
is only possible on the DriveRight Trip 500AL.
C
OMPONENTS
The DriveRight Trip 500AL (VSS Input) should come with all
of the materials shown below. Please make sure you have all
listed components before proceeding with the installation.
DriveRight Display
Mounting Bracket
Right Angle Adapter Bracket
Tie Wraps (12)
#6 x 1/2" Pan Head Self-Tapping Screws (3)
6-32 x 1/2" Flat Head Machine Screws (3)
#6 x 1/2" Flat Head Self-Tapping Screws (3)
NOTE: Small hardware includes spares not required for installation.
Battery
(CR123 3V Lithium)
Red +12V Wire
with Fuseholder (22 AWG)
Coiled Cable Extension
Black Ground Wire
(22AWG)
Butt Splices (5)
(26-22AWG or 24-20AWG)
#6 Split Lock Washers (6)
#6 Flat Washers (6)
Visor Clip
Harness Cable
White VSS Wire
(22AWG)
Double-Sided Foam Tape (4 strips)
In-Line Splice
6-32 Nuts (3)
Fuses (2)
(3AG 1-1/4 x 1/4",
.25A, Slo-Blo)
Split Flexible Tubing
Velcro ® Tape (4 pair)
Spade Terminal Sets:
#8-10 Studs
1/4" Studs
(3.5 - 5 mm)
Insulated Male Disconnects
(18-22AWG)
T-Tap Disconnects:
Blue
(14-16AWG)
(18-22AWG)
Page 1
(6 mm)
Red
Advertisement
