Related Manuals for DAVIS DriveRight 8127
Summary of Contents for DAVIS DriveRight 8127
-
Page 1: Installation Manual
GPS/Wireless System Installation Manual Includes: GPS/Wireless Interface Module (#8127) GPS Module (#8128) Wireless On-Board Module (#8129) -
Page 2: Regulatory Compliance
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved in writing by Davis Instruments may void the warranty and void the user's authority to operate this equipment. - Page 3 Note: The GPS Module (#8128) is only compatible with the DriveRight 600 device (#8126). It cannot be used with older DriveRight devices. The GPS/Wireless Interface Module (#8127) and Wireless On-Board Module (#8129) are compatible with both DriveRight 600 and 600 devices but not with earlier DriveRight models.
- Page 4 Components and Mounting Hardware Components and Mounting Hardware The following mounting hardware kit is included with GPS/Wireless Interface Module (#8127) and can be used with all three components: 5.5'' Cable Ties (4) Velcro Tape (6 pair) ® 12'' Cable Ties (2)
- Page 5 Components and Mounting Hardware The GPS Module (#8128) is sold separately and comes with the component shown below: GPS Module (#8128) The Wireless On-Board Module (#8129) is also sold separately and comes with the component shown below: Wireless On-Board Module (#8129)
- Page 6 GPS/Wireless System Wiring Diagram GPS/Wireless System Wiring Diagram The following wiring diagrams display all the possible wiring solutions for connecting the GPS/Wireless Interface Module, GPS Module, and Wireless On-Board Module to an existing DriveRight 600 or 600 system. Wiring the GPS/Wireless System with a DriveRight 600...
- Page 7 GPS/Wireless System Wiring Diagram Wiring the GPS/Wireless System with a DriveRight 600...
-
Page 8: Making Connections
GPS/Wireless System to a DriveRight 600 without a GPS Module present, the plug is not needed as part of the installation. Contact Davis instruments or your local retailer or distributor for details. See “Contacting Davis Technical Support” on page 14 for more information. - Page 9 GPS/Wireless System Wiring Diagram See the diagrams below for help on disconnecting and connecting the cables properly: Disconnecting Cables: Hold both cables by their connector housing and pull apart. The housing of the male connector slides to separate the cables. Connecting Cables: Slide Connector Housing...
- Page 10 GPS/Wireless Interface Module #8127 Note: If using a DriveRight 600 with a #8157 GPS Module, place the #8157 GPS antenna in the same location as the #8128 GPS Module shown in the drawing above. 1. Place the GPS/Wireless Interface Module under the dashboard of the vehicle, near the DriveRight 600 device or SmartCard On-Board Reader.
- Page 11 4. Secure module by using two pieces of velcro tape or two pieces of double- sided tape. Note: Davis does not recommend mounting the GPS Module or Wireless On-Board Module outside of the vehicle. 5. Route the GPS Module cable to the GPS/Wireless Interface Module and plug the connector into the correct socket.
- Page 12 Wireless On-Board Module (#8129) This module installs in the vehicle and connects to the DriveRight device through the GPS\Wireless Interface Module (#8127). Once the vehicle is parked in the fleet parking lot, this module communicates with a Base Station for Wireless Download System (#8130) and moves the DriveRight data to the FMS database.
- Page 13 Wireless Download System Overview Wireless Download System Network Set Up The following diagram is of a sample Wireless Download System network.
-
Page 14: Product Specifications
Product Specifications For the GPS\Wireless Interface Module (#8127) Size ......3.25'' x 2.00'' x 1.00'' (97 mm x 61 mm x 23 mm) Weight . - Page 15 Product Specifications For the Wireless On-Board Module (#8129) Size (l x w x h) ..... . 2.50'' x 1.75'' x 0.83'' (64 mm x 45 mm x 21 mm) Weight .
-
Page 16: Contacting Davis Technical Support
(510) 670-0589 – Fax to Technical Support. E-mail Support support@davisnet.com – E-mail to Technical Support. info@davisnet.com – E-mail to Davis Instruments. Web Support www.davisnet.com – Copies of User Manuals and Installation Manuals are available on the “Support” page. Watch for FAQs and other updates.