Advertisement
Step 7: Connect the DriveRight Display and Go for a Test Drive
Insert the battery into the DriveRight as shown below.
Connect the harness cable to the DriveRight display cable as
shown below. It is important to hold the DriveRight display
cable as shown below (on the cable, not the sheath) in order
to achieve a secure connection. The cables should "click" into
place when a secure connection is made.
Harness Cable
Once plugged in, the display should "wake-up" into the Cur-
rent Readings screen. If the display screen remains blank,
make sure the battery is in the unit. If it is, try pressing MODE.
If the screen remains blank after pressing MODE, press both
the MODE and PLUS simultaneously. If it remains blank after
that, check both the +12V and ground connections.
Page 10
Plastic
Sheath
Hold cables as shown
to connect.
DriveRight Display Cable
Advertisement
