• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modification not expressly approved in writing by Davis Instruments may void the warranty and void the user's authority to operate this equipment.
Page 3
(# 8127) or with your CarChip Fleet Pro using the CarChip Fleet Pro GPS/ Wireless Interface Module (# 8251). The DriveRight GPS/Wireless Interface Module (# 8127) connects the GPS and/or Wireless On-Board Modules to a DriveRight 600 device. The CarChip Fleet Pro GPS/Wireless Interface Module (# 8251) connects the GPS and/or Wireless On-Board Modules to a CarChip Fleet Pro.
Page 4
12'' Cable Ties (2) Double-Sided Foam Tape (6 strips) The GPS/Wireless Interface Module for DriveRight (# 8127) or the GPS/ Wireless Interface Module for CarChip Fleet Pro (# 8251) should come with the mounting hardware (above) and one of the components shown below:...
Page 5
Components and Mounting Hardware The GPS Module (# 8128) is sold separately and comes with the component shown below: GPS Module (# 8128) The Wireless On-Board Module (# 8129) is also sold separately and comes with the component shown below: Wireless On-Board Module (# 8129) Both the GPS Module and Wireless On-Board Module work with both...
Page 6
DriveRight GPS/Wireless Wiring Diagram DriveRight GPS/Wireless Wiring Diagram The following wiring diagrams display all the possible wiring solutions for connecting the GPS/Wireless Interface Module, GPS Module, and Wireless On-Board Module to an existing DriveRight 600 system. Wiring the GPS/Wireless System with a DriveRight 600...
DriveRight GPS/Wireless Wiring Diagram Making Connections The GPS/Wireless Interface Module for DriveRight can be installed with either the GPS Module, the Wireless On-Board Module or both. The instructions below assume an installation involving all three modules. Modify your own installation as necessary. 1.
Page 8
CarChip GPS/Wireless Wiring Diagrams CarChip GPS/Wireless Wiring Diagrams Wiring the GPS Wireless System to a CarChip Fleet Pro CarChip Fleet Pro # 8246 GPS\ Wireless Interface Module # 8251 Wireless On-Board Module Module # 8128 # 8129 Making Connections The GPS/Wireless Interface Module for CarChip Fleet Pro can be installed with either the GPS Module, the Wireless On-Board Module or both.
Page 9
# 8128 Situated line-of-sight to the sky GPS/Wireless Interface Module # 8127 or # 8251 CarChip Fleet Pro 1. Place the GPS/Wireless Interface Module under the dashboard of the vehicle, near the DriveRight 600 device or SmartCard On-Board Reader or CarChip Fleet Pro.
Page 10
4. Secure module by using two pieces of Velcro tape or two pieces of double- sided tape. Note: Davis does not recommend mounting the GPS Module or Wireless On-Board Module outside of the vehicle. 5. Route the GPS Module cable to the GPS/Wireless Interface Module and plug the connector into the correct socket.
Page 11
The Wireless On-Board Module installs in the vehicle and connects to the DriveRight/CarChip device through the GPS/Wireless Interface Module for DriveRight (# 8127) or for CarChip Fleet Pro (# 8251). Once the vehicle is parked in the fleet parking lot, this module communicates with a Base Station for Wireless Download System (# 8130) and moves the DriveRight/CarChip data to the FMS database.
Page 12
Wireless Download System Overview Wireless Download System Network Set Up The following diagram is a sample Wireless Download System network.
(510) 670-0589 – Fax to Technical Support. E-mail Support support@davisnet.com – E-mail to Technical Support. info@davisnet.com – E-mail to Davis Instruments. Web Support www.davisnet.com – Copies of User Manuals and Installation Manuals are available on the “Support” page. Watch for FAQs and other updates.