Specific Gravity Determinations - OHAUS DIAL-O-GRA 310 Instruction Manual

expanded polystyrene container. Follow these instructions and you can assemble
your balance in just a few minutes.
1. Remove the poly-container from the shipping carton and place it so that you
can see the base and specific gravity stand. See Figure 3.
2. Cut the strap and lift off the upper half of the poly-container. Remove the base
and specific gravity stand. Hold the base upside down. Insert the round, flat end
of the stand through the slot in the base. Rotate stand into position as shown in
Figure 4. It will turn easily if you rotate it as soon as the round end clears the
opening. When the base and the specific gravity stand are upright, the OHAUS
on the stand must be facing down.

SPECIFIC GRAVITY DETERMINATIONS

SPECIFIC GRAVITY DETERMINATIONS SPECIFIC GRAVITY DETERMINATIONS SPECIFIC GRAVITY DETERMINATIONS SPECIFIC GRAVITY DETERMINATIONS
Figure 3.
Figure 4.
3