Controls - Hobart FP Series Installation And Operation Instructions Manual

3

controls

de
GB
F
nl
➀
Machine on / oFF
➁
program button
➂
eco button
➃
stop button
➄
display
➅
display
➆
salt required
➇
detergent-/rinse aid indicator Indicates detergent or rinse aid deficiency (integrated reservoir).
➈
hygiene indicator
➉
service indicator
6
4 2 3 1 9 8
10 7
Pushing this button switches the machine on.
As soon as the machine is ready for operation, the wash cycle is started
by pushing this button also.
By pushing and holding (3 seconds) this button, the drain and self
cleaning cycle starts. At the end of the cycle, the machine switches off
automatically.
after switch off, the machine is not voltage free!
Furthermore the button illuminates to indicate the mode of the machine:
Green
Blue
red
(permanent)
Green/red
(alternate flashing)
The status of the program is indicated by the color change of the four
button segments:
Filling increasingly GREEN
Draining decreasingly GREEN
Washing from BLUE back to GREEN
Drying a rotating blue segment on a green background
By pushing this button, it is possible to select between different preset
programs, according to the model and equipment.
The program no. (e.g. p02) will be shown in the Display
By pushing this button the Vapo Rinse ECO will be activated/deactivated.
In case of operating error or faults, it is possible to switch-off the
machine immediately without the drain cycle, by pushing this button.
after switch off, the machine is not voltage free!
e.g. temperature indication wash (°C) (see chapter 7).
e.g. temperature indication rinse (°C) (see chapter 7).
Indicating the need for regeneration salt to be added.
(Only with built-in softener.)
Indicates that a hygiene cleaning should be carried out
(see chapter 6.4).
Indicating, that the machine has a fault (see chapter 8).
6
5
= Machine is ready for operation
= Wash cycle is running
= Failure indication (see chapter 8)
= Failure indication (see chapter 8)
➅ .
1637-A-03-09