Loading The Batting; Adjusting The Quilt Layers - Bradley Quilt UltraQuilter Owner's Manual

℘

Loading the Batting

1. Insert the batting between the quilt top
and quilt back by placing it over Pole 3,
under Pole 2, and ending at Pole 1.
2. Pin the batting to the quilt back on Pole
1, as shown in Figure 3.6.
3. Using the Pole 1 ratchet knob, wind
Pole 1 clockwise 3/4 of a turn. Pin the
free end of the quilt top to the batting,
as shown in Figure 3.7.
4. Roll the excess batting and place it in
the space between Poles 2 and 3.

Adjusting the Quilt Layers

1. Set the Pole 1 ratchet to lock. Using the
Pole 1 ratchet knob, wind the three quilt
layers 1/4 of a turn on Pole 1 clockwise,
as shown in Figure 3.8. Make sure that
the ratchet locks for Poles 2 and 3 are
unlocked.
Figure 3.6 Batting pinned to Pole 1
Figure 3.7 Quilt top centerpoint
Figure 3.8 Three layers on Pole 1
8
The UltraQuilter Owner's Manual
Loading a Quilt