ℜ Completing The Frame Assembly - Bradley Quilt UltraQuilter Owner's Manual

ℜ
Completing the Frame
Assembly
Refer to Figure 2.4 for the following steps:
1. Insert Poles 1, 2, and 3 into each of the
three holes of the Right Horizontal Bar,
making sure that Pole 1 is inside of your
sewing machine neck area and Poles 2
and 3 are outside of the sewing machine
neck area.
2. Attach the Right Horizontal Bar to the
Right Upright using the wing nut.
3. Attach the Right Upright to the table,
and tighten the wing nut so the Right
Horizontal Bar is perpendicular to the
table.
4. Adjust the height of Right and Left
Horizontal bars so Pole 1 rests on the
sewing machine base.
You are now ready to load a quilt.
Figure 2.4 Assembled quilt frame
5
The UltraQuilter Owner's Manual
Setting Up the UltraQuilter