Configuring A Work Area - Bradley Quilt UltraQuilter Owner's Manual

5. Configuring a Work Area

When you are between quilting projects, you
can use your UltraQuilter as a sewing work
area. Simply drop the quilt rack over the front
of the table. The optional cutting board fits
directly over the tracks and creates a nice
cutting surface. Figures 5.1 and 5.2 show the
UltraQuilter used as a work area.
If you want to position the quilt rack over the
side of the table and you have a quilt loaded on
the rack, follow these steps to remove the
sewing machine from the quilt rack:
1. Move the machine and carriage to the
right end of the table.
2. Remove the Right Upright from the
table and carefully remove the poles
from the Right Horizontal Bar.
3. Remove Pole 1 from the neck area of
the sewing machine.
4. Move the sewing machine and carriage
away from the end of the table.
Warning. Do not store your sewing
!
machine on the carriage when the quilt
rack is dropped over the side unless you
have blocked the wheels. The carriage
could roll off the table.
5. Reinsert Poles 1, 2, and 3 into the Right
Horizontal Bar and attach the Right
Upright to the table.
Figure 5.1 Work area front view
Figure 5.2 Work area back view
12
The UltraQuilter Owner's Manual
Configuring a Work Area