Advertisement
Insert bow frame section
Stern
7
UNFOLD SKIN. INSERT BOW AND STERN FRAME SECTIONS
•
Feathercraft logo is located at the bow. There are three
velcro tab closures along the inside keel of the skin. Open
the velcro tabs. Slide the bow and stern sections into
the skin.
Center the frame along the inside keel strip, pushing
sections to the very ends. From the outside of the skin,
check the frame alignment along the keel strip. Secure
velcro closures around the keel tubes.
8
INSTALL KEEL EXTENSION BAR
•
Keel extension bar has two bands of black tape on the
stern end, and one band of black tape on the bow end.
•
Attach the stern end of the extension bar on to the stern
keel bar. Slide the bar apart, attaching the other end to the
bow keel bar.
Bow
Feathercraft
Wisper
10
Advertisement
