Fog Lamps; Taillamps, Turn Signal; Sidemarker, And Stoplamps - Chevrolet Orlando 2013 Owner's Manual

2. Remove the bulb from the bulb
socket by pulling it straight out.
3. Install the new bulb in the bulb
socket.
4. Replace the bulb socket into the
headlamp assembly by turning
clockwise.

Fog Lamps

1. Locate the bulb assembly under
the front fascia.
2. Remove the bulb by turning it
counterclockwise and pulling it
straight out of the assembly.
3. Disconnect the electrical
connector from the bulb.
4. Install the new bulb by turning it
clockwise into the assembly.
5. Reconnect the electrical
connector to the bulb assembly.

Taillamps, Turn Signal,

Sidemarker, and
Stoplamps
Liftgate Inboard Taillamps
1. Open the liftgate.
2. Remove the liftgate taillamp
access cover.
Vehicle Care
3. Remove the bulb socket by
turning counterclockwise and
pulling straight out.
4. Remove the bulb from the
socket by pulling it straight out.
5. Install the new bulb in the bulb
socket.
6. Install the bulb socket by turning
clockwise.
7. Install the liftgate taillamp
access cover.
10-27