Replacement Bulbs; Electrical System - Chevrolet Orlando 2013 Owner's Manual

10-30 Vehicle Care
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb into the
socket.
5. Install the bulb socket by turning
clockwise into the license plate
lamp assembly.
6. Replace the license plate lamp
assembly by using the two
screws to secure.

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Front Fog Lamp
Front and Rear
Sidemarker Lamp
Front Parking Lamp
Front Turn
Signal Lamp
High Beam/Low
Beam Headlamp
Liftgate Taillamp
Rear Stop Lamp/
Taillamp
Rear Turn
Signal Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Bulb
Electrical System
Number
Overload
3157K
The vehicle has fuses and circuit
H8LL
breakers to protect against an
194 (W5W)
electrical system overload.
When the current electrical load is
194 (W5W)
too heavy, the circuit breaker opens
and closes, protecting the circuit
3457NAK
until the current load returns to
normal or the problem is fixed.
H13LL
This greatly reduces the chance of
circuit overload and fire caused by
electrical problems.
3057K
Fuses and circuit breakers protect
3057K
power devices in the vehicle.
Replace a bad fuse with a new one
5702NAK
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.