Error Code Numbering Rule; Error Code List - Samsung CM1089 Service Manual

5. Alignment and Adjustments

5-13 Error Code Numbering Rule

1. ERROR CODE NUMBERING RULE is applied to a microwave oven and an oven .(CMO, OTR, Grill, Convection,
Commercial etc .)
2. All sensors and devices have their own number . ex) Gas Sensor = 1, Temp . Sensor = 2, . . .
3. Of each device, No .1 and No .2 refer to "Open Error" (not sensed) and "Short Error", respectively .
4. For unusual cases, errors can be indicated in letters after discussion in advance. ex) Key Short Error (-SE-)
5. Error code not mentioned below should be discussed in advance and approved by P/L and numbered, reported to
relevant departments .
6. This numbering rule has been applied to models to have been developed since January, 1, 2005 . (But, GE or
Customize model are excluded .)

5-14 Error Code List

Gas Sensor
Error Code Gas Sensor Error Case (E-1X)
E-11 Open
E-12 Short
E-13 T1 Max Time Error
E-14 Dry Up / No Load
Temp Sensor
Error Code Temp. Sensor Error Case (E-2X)
E-21 Open
E-22 Short
E-23 T1 Max Time Error (Preheating not completed)
E-24 Over temperature error
E-25 In case abnormal temperature is sensed at Micro Cook
In case the temperature is not over the fixed AD in first 3 minutes after cooking by heater
E-26
starts .
DEVICE ERROR CASE
0- Others 1- Open
1- Gas Sensor 2- Short
2- Temp . Sensor
3- Weight Sensor
4- Easy/PH Sensor
5- EEPROM
•
•
•
•
•
•
21