Bosch 940 ES Installation Manual page 21

Adjusting minimum power fan speed (P2)
To select fan speed:
B Press ON/OFF button into OFF.
B Press and hold "Program" button
ON/OFF button to turn appliance ON.
Fig. 27
B As soon as '188' is displayed, release "Program"
button , and the display should read P2.
B Press
or to choose the fan speed suitable
with your installation, see Table 20 or 21.
B Press and hold ( 5 sec.) "Program" button
the display flashes, then the selected value is memo-
rized.
Do not set P2 to greater then 9.
i
6 720 644 930
Adjusting maximum power fan speed (P1)
To select fan speed:
B Press ON/OFF button into OFF.
B Press and hold "Program" button
and press
ON/OFF button to turn appliance ON.
Fig. 28
B As soon as '188' is displayed, release "Program" but-
ton
B Press the minus button
B Press "Program" button
until The current setting will appear on the display.
B Press
with your installation, see Table 20 or 21.
B Press and hold ( 5 sec.) "Program" button
the display flashes, then the selected value is memo-
rized.
i
Installation instructions
, and the display reads P2.
to display P1.
to enter P1 adjustment.
or to choose the fan speed suitable
Proceed directly to Section 6.4 to confirm
CO values are within range.
2
and press
until
21