Skoda 2012 Citigo Owner's Manual page 146

›
Hold the tail light assembly in the installation position with one hand, and re-
move the plastic nut with the other.
5
›
Carefully remove the tail light from the body and place it on a clean, smooth
surface.
›
Unlock the lamp holder on the locking latches (arrows)
move the bulb holder from the tail light.
›
To reinsert the bulb holder, first place the bulb housing in the tail light assem-
bly. All locking plates (arrows) must audibly snap into place.
›
Carefully place the tail light assembly in the opening in the body.
›
Hold the tail light assembly with one hand, and attach and tighten the plastic
nuts with the other hand.
5
›
Insert the connector on the lamp holder and press the locking mechanism
2
towards the tail light.
›
Fold the cover back, install the luggage compartment cover, and close the
1
luggage compartment cover.
Fold the rear seat backrest back.
Replacing the bulbs in the tail lamp assembly
›
Push the faulty bulb into the holder, turn anti-clockwise up to the stop and re-
move » Fig. 127 - .
›
Insert a new bulb into the socket and turn clockwise to the stop.
144
Do-it-yourself
» Fig. 127 -  and re-
Ð