Table of Contents
Advertisement
Ceiling mounting
4.
Adjust the image with the focus and zoom levers.
Configure your camera using the software menus in the OSD. See Software Setup in the following
5.
section of this manual.
6.
Place the dome cover over the base and adjust the dome window. Tighten the captive screws that
secure the cover to the base.
7.
Clean the camera dome with an approved glass cleaning solution and a lint free cloth.
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains,
—
gently rub the surface with a soft cloth moistened with a mild detergent solution, then rinse
and dry it with a soft cloth.
Remove all foreign particles, such as plastic or rubber materials, attached to the camera
—
housing. These may cause damage to the surface over time.
Do not use benzene, thinner or other chemical products on the camera assembly; these
may dissolve the paint and promote damage of the surfaces. Before using any chemical
CAUTION
product, read the accompanying instructions carefully.
SECTION 2: INSTALLATION
High Performance CCTV Dome Camera User Manual
Wall mounting
9
Advertisement
Table of Contents
