Table of Contents
Advertisement
SECTION 2: INSTALLATION
SECTION 2
Installation
2.1 General Guidelines
Outdoor installations: Use the rubber rings included with the machine screws (4) to ensure that
•
the unit is sealed properly.
Dome/window care: Handle the dome carefully to prevent scratching. If a scratch appears over
•
the lens, adjust the dome window to move the scratch out of view.
Keep dome cover and camera lens clean. To avoid smearing, do not expose the camera lens
to a strong light source such as the sun or spot lights.
CAUTION
Monitor impedance: Set the monitor impedance switch to 75Ω.
•
Power supply: To avoid fire or shock hazard, use only a UL listed power supply.
•
Camera drop cable: The camera drop cable includes two connectors:
•
Power connector (black with green terminal adapter) – The connector is non-polarized. Use
—
AC24V power source (AC24V 1A adapter) or DC 12V power source (DC12V 1A adapter).
Video coax connector (BNC, yellow) – for transmission of the video signal across coax
—
(75Ω) cable.
6
www.sc-black.com
Advertisement
Table of Contents
