Table of Contents
Advertisement
2.1.1 What you need
To install the camera you will need:
12 VDC or 24 VAC power source
•
Tools for mounting the camera
•
2.2 Vandalproof camera
mounting
The camera can be installed on a junction box or
directly to a wall or ceiling.
1.
Attach the surface mount bracket to the ceiling
or wall using four (4) mounting screws.
2.
Connect the dome base to the surface mount
bracket using the screws with rubber rings
provided.
3.
Route the power and video cables to the
camera location and attach them to the camera
drop cable (see General guidelines above).
4.
Attach the dome base to the surface mount
bracket using the four machine screws
provided.
Power Connector
High Performance CCTV Dome Camera User Manual
SECTION 2: INSTALLATION
Video Coax
Connector
7
Advertisement
Table of Contents
