4iiii Sportiiiis User Manual page 13

The Zones Tab
Overview
The Zone Adjustment widget - The Zone adjustment widget controls the 7 LEDs on the
Sportiiiis boom and each LED is represented by a colored section with yellow nodes on
their outer limits. Each zone's start and end are changed bydragging the yellow nodes
(see example setup below)
1) The center green (or whichever color you choose to make it) section represents
your target zone for the current activity, and the LEDs to either side are set up to
guide you to that target zone. The color of each LED can be changed by clicking
on the diamond shaped LED icons below the zones. The Sportiiiis configuration
application will show you the available LED colors on your particular Sportiiiis
hardware.
2) Run / Bike selectors - You can setup zone profiles for Run and Bike sensors
separately, then change between them while using Sportiiiis. (see page 3 for
more)
3) "Enable this zone" button – Choose whether or not you want this zone enabled
on your Sportiiiis unit. All paired sensors are included.
4) "Include in Auto Announce" button - Sportiiiis can audibly update you on all
active sensors at regular intervals. Selecting this button will include the current
sensor in this announcement. (the interval is configured in the Setup>Audio
section, covered on page 9)
5) The Sensor Selectors - Select which sensor you want to configure. Sensors
that are paired with Sportiiiis are illuminated, those not paired are greyed out.
Note: You can still select and setup zones for sensors that are not currently
paired. (see page 17 for information on pairing sensors with Sportiiiis)
Page 13
Sportiiiis User Manual
Version 1.04