4iiii Sportiiiis User Manual

Download the Sportiiiis User Guide & Software
The Sportiiiis User Guide and Configuration Utility software are available for download at:
http://www.4iiii.com/support.html
Charging Sportiiiis
To charge your Sportiiiis unit, uncover the micro-USB port on the bottom of the unit and plug in the
included USB 2.0 Charge/Sync Cable. Plug the other end of the cable into one of your computer's
USB ports a USB power adapter.
When your Sportiiiis unit is connected to your computer and you are running the Sportiiiis Software
Application, the battery icon on the bottom left of the interface will indicate the charge status and
percentage of battery power currently available in your Sportiiiis unit.
The Sportiiiis User Guide has
instructions on the use of the
Sportiiiis unit and Configuration
Utility.
Mounting Sportiiiis on Your Glasses
1. Insert tie wraps into mounting bracket loosely,
as shown below:
2. Slide the Sportiiiis unit into the mounting bracket.
3. Align the Sportiiiis unit on the glasses as you'd
like it to be mounted. At this point, choose
whether you'd like the boom on the inside or the
outside of the lens (extra tie wraps are included
so that you can change your mind later).
Boom Outside Lens
Boom Inside Lens
4. Carefully tighten the tie wraps to fix the
mounting bracket in place.
5. Slide the Sportiiiis unit off of the mounting
bracket and cinch down the tie wraps as much
as possible.
6. Cut as much of the excess tails from the tie
wraps as you can.
7. Slide your Sportiiiis unit back onto the mount,
bend the boom into its final position, and go out
and enjoy your Sportiiiis unit!