Download Print this page

4iiii Sportiiiis Quick Start Manual

Heads up display system
Hide thumbs Also See for Sportiiiis:

Advertisement

Getting to Know Your Sportiiiis Unit
Boom
TipTap Sensor
contains
several
changes functions
LEDs (Light-Emitting-
by simply tapping
Diodes) that can be
on the side of the
programmed
by
unit
color and position to
indicate where your
Multi-Function Button
performance
is
turns Sportiiiis on
relative to the target
and off, and controls
zone
for
the
other functions
currently
enabled
sensor
Welcome to Sportiiiis!
Thank you for purchasing Sportiiiis. Sportiiiis is a heads-up display that guides you to your target range (zone) during
running, cycling, and many other sports - while allowing you to keep your eyes on the road and maintain form. It can
pair with, and receive data from any ANT+TM enabled heart rate strap, foot pod, power or speed/cadence sensor.
When properly mounted to your glasses, the boom of the Sportiiiis unit will be in your peripheral vision, so that its
LEDs can tell you whether you are below, above, or in your zone by their color and position.
Through the Sportiiiis software for Windows or Mac, you can set up Sportiiiis and configure the zones for your
individual needs.
What's In the Box?
USB Charge /
Sync Cable
USB Port
Speaker
connect to a
triggered by TipTap
computer
to
or (optionally) when
configure,
above
or
below
charge
and
sync
your
zone for currently
Sportiiiis unit
enabled sensor
Sportiiiis Unit
(2) Mounting Brackets
(10) Tie Wraps
Multi-Function Button Actions
PRESS & HOLD BUTTON TO HEAR
CONTINUE HOLDING BUTTON
"Power"
"Mode"
"Pairing"
"Volume"* (1 through 4)
Sportiiiis contains an accelerometer, which allows it to respond to taps on the side of the unit. For best results, hold
the unit with your middle finger and tap sharply with your index finger.
1 Tap
Audio Feedback of currently displayed sensor measurement
2 Taps
Rotates through the enabled sensor measurements

QUICK START GUIDE

RELEASE BUTTON
Proceed to Mode
Unit turned on/off
Proceed to Pairing
Switches Mode (Run/Bike)
Proceed to Volume
Pairs with available sensors
Move to next volume level
Changes volume
TipTap

Advertisement

loading

Summary of Contents for 4iiii Sportiiiis

  • Page 1: Quick Start Guide

    TipTap LEDs (Light-Emitting- computer Sportiiiis contains an accelerometer, which allows it to respond to taps on the side of the unit. For best results, hold by simply tapping or (optionally) when Diodes) that can be configure, the unit with your middle finger and tap sharply with your index finger.
  • Page 2 Charging Sportiiiis To charge Sportiiiis, uncover the micro-USB port on the bottom of the unit and plug in the included USB 2.0 Charge/Sync Cable. Plug the other end of the cable into one of your computer’s USB ports or a USB power adapter.