Contents Page Items delivered General product information Tips for mounting System overview Connecting and Operating Internal adjustments Troubleshooting Maintenance and Care Technical specifications Technical Support Your notes Coaxial Cable Specifications Vicon Standard Equipment Warranty Vicon Part Number 8009-8170-01-02 Rev 709...
- leave enough space (at least 1 RU) in the rack between units for cooling - Do not install the unit at damp, oily or dusty locations. - Do not expose the unit to strong vibrations. Vicon Part Number 8009-8170-01-02 Rev 709...
Connecting and Operating The V-DA-8-16 can be configured as follows: 2 video inputs with 8 outputs each 4 video inputs with 4 outputs each 8 video inputs with 2 outputs each 1 video input with 16 outputs Vicon Part Number 8009-8170-01-02 Rev 709...
Internal Adjustments The V-DA-8-16 contains two identical circuit card boards that can be configured to pro- vide different combinations of video inputs and video outputs. This is accomplished by setting jumpers on the boards, which are located inside the unit.
To clean use a soft dry cloth. Never open the unit to clean inside. This may only be done by authorized personnel according to the local safety regulations. If the device will be handed over to third parties, make sure to include these operating instructions. Vicon Part Number 8009-8170-01-02 Rev 709...
17.3 in L x 1.85 in H x 5 in D Dimensions (440 x 47 x 128 mm) (W x H x D) 19" (1 HU) Connections BNC-F Video IN BNC-F Video OUT Low voltage socket Power Accessories included Operating manual, power supply Vicon Part Number 8009-8170-01-02 Rev 709...
Technical Support Should you have any problems during installation you can reach our Technical Hotline at the following telephone number: 1-800-34-VICON (1-800-348-4266) Vicon Part Number 8009-8170-01-02 Rev 709...
Coaxial Cable Recommendations Caution: Careful selection of proper cable is essential to obtain the best performance from this equipment. Vicon assumes no responsibility for poor performance when cables other than those recommended, or equivalent, are installed. In all cases, coaxial cable impedance should be 75 ohms.
Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship under Normal Use from the date of original retail purchase for a period of three years, with the following exceptions: VCRs, all models: Labor and video heads warranted for 120 days from date of original retail purchase.
Phone: +49 (0) 4321 8790 Fax: +49 (0) 4321 879 47 Far East Office Unit 5, 17/F, Metropole Square 2 On Yiu Street, Shatin New Territories, Hong Kong (852) 2145-7118 Fax: (852) 2145-7117 Internet Address: www.vicon-cctv.com Vicon Part Number 8009-8170-01-02 Rev 709...
Need help?
Do you have a question about the V-DA-8-16 and is the answer not in the manual?
Questions and answers