Specifications; Recommended Set-Up - Campa ConvectAir Installation & Operating Instructions Manual

2

SPECIFICATIONS

Model
number
7716-C10
7716-C15
7716-C20
Optional setback system (sold separately) :
Your IMPRESARIO can be fitted with the optional CONVECTAIR Programmer Modules
to program temperature setbacks in periods of prolonged absence, providing the
same comfort and more savings. For more information, contact your electrical
contractor or dealer, or call CONVECTAIR (see Back Cover).
3

RECOMMENDED SET-UP

PLEASE NOTE : Your heater must be installed in accordance with national and local codes and
CONVECTAIR recommends an installation by a qualified electrician.
CAUTION
• Do not position the heater below an electrical receptacle.
• Your heater must be installed so that the control panel is out of reach from anyone in the
bath-tub or in the shower. Do not install over a bath-tub or spa.
• Do not install the heater behind a door, furniture or other obstacles, or in front of an air
exhaust vent.
• Keep combustible materials such as curtains, away from the heater.
• Your heater is equipped with a heating element that may reach high temperatures. Do not
install or operate in the presence of gasoline, paint solvents or other flammable products.
• Maintain the minimum required clearances (height from floor, distances from side walls or
furniture, drapes, etc).
Page 4
Description
Impresario,
Radiant electric heater
.
Impresario,
Radiant electric heater.
Impresario,
Radiant electric heater.
DO NOT COVER THE FRONT PANEL OR TOP OF THE HEATER
Capacity
800W / 1000W
1250W / 1500W
1600W / 2000W
Voltage
208 / 220-240V,
60Hz
208 / 220-240V,
60Hz
208 / 220-240V,
60Hz
Current
draw
4A / 5A
6A / 7A
7A / 8A