Quickstart Guide - Campa ConvectAir Installation & Operating Instructions Manual

1

QUICKSTART GUIDE

"ON" indicator light "Open Window" Activate/Deactivate key
"ON/Stanby" key
Operating mode selection key
Electrical requirements : 208 V / 220-240 V
Install a 2 in. x 3 in. wall junction box, positioned within the space defined by the
wall bracket. Lowest fixing hole of wall bracket should be at 32 cm (12
the floor (page 6 Fig. B).
Installing and connecting the heater :
To turn the heater ON :
To set the temperature :
lower the temperature setting (page 8).
To change from °C to °F :
To change Mode :
> Program > Comfort >... (pages 9-10).
To lock or unlock the control panel :
Temperature adjustment knob
Troubleshooting :
To contact CONVECTAIR :
Operating mode display
(pages 4-7).
Press the ON/Standby key
Turn the Temperature adjustment knob
(page 9)
Press the Mode key
Press and hold the Window key
(page 16).
(Back Cover).
(page 8).
(Comfort > Economy > Frost protection
at the same time (page 11).
Temperature adjustment knob
Heating indicator light
") from
1/2
to raise or to
and the
Page 3