Table of Contents
Advertisement
Installing the DMS (Continued)
10
E-
Connecting the SIM I/M
The SIM I/M must be used for the power distribution function.
1
Loosen the two screws on the bottom of the DMS front
cover.
2
Hold the bottom two sides of the DMS and push upwards
to slide open the cover. (Sliding type cover)
3
Connect the provided power cable to the power terminal.
4
Connect the C1,C2 communication cable from the SIM I/M
to the J1 terminal of the DMS.
(Communication will fail if the cable is notconnected
properly.)
Advertisement
Table of Contents
