LG-Nortel ARIA SOHO Hardware Description And Installation Manual page 63

ARIA SOHO Hardware Description and Installation Manual
STARTING THE ARIA SOHO
6.2.3.4 Numbering Plan Type (PGM 104)
To program the Numbering Plan Type, perform the following:
1. Press the [TRANS/PGM] button + 104.
2. Enter the Numbering Plan Type (1 digit, refer to Table).
3. Press the [HOLD/SAVE] button to accept changes.
NUMBER SET TYPE/
PRESS #
1
2
3
4
5
6
7
8
6.2.3.5 Flexible Numbering Plan (PGM 105)
To set the Flexible Numbering Plan, perform the following Steps:
1. Press the [TRANS/PGM] button + 105.
2. Enter the Station Range (dial the Start and End numbers as described in the Table).
3. Press the [HOLD/SAVE] button to accept changes.
STATION NUMBERS
000 001 002 003
100 101 102 103
000 001 002 003
100 101 102 103
000 001 002 003
100 400 102 103
NUMBERING PLAN TYPE
INTERCOM RANGE
100-151
100-151
100-151
700-751
200-251
10-61
100-151
100-151
NUMBERING PLAN DETAIL
[TRANS/PGM] + 105
Station Number Assign—Four station numbers correspond to the 4 port numbers. The
Station number length is in the range of 2 digits through 4 digits. There are two
methods for changing the station number:
Dial two station numbers – Dial the range of the start and end Station numbers. The
LCD will show the dialed range value. Press the [HOLD/SAVE] button to accept
change. All LEDs of BTNs will be extinguished.
Press one of FLEX 1-4 - Each FLEX button (1-4) is assigned to a corresponding
Station number (1- 4) on the current LCD. The LED of the pressed Flexible button will
show steady light. Dial the new Station number and press the [HOLD/SAVE] button to
accept change, or press another Flexible button to assign a Station number to other
stations without saving.
To change the next 4 station numbers then press [▼] button. If you want to change
previous 4 station numbers, then press [▲] button.
To delete all Station numbers, press the [SPEED] button and press the [HOLD/SAVE]
button; all station numbers will be cleared.
Press the [HOLD/SAVE] button to save changes to the database permanently (Ex:
Press FLEX 2, dial 400 and press [HOLD/SAVE] button).
DEFAULT
As the basic type, the 1
Yes
number should be 1-4.
No The Station number can be changed up to 799.
No
No
No
No
No
No The Station number can be changed up to 999.
DESCRIPTION
58
Issue 1
Aug, 2006
REMARK
st
digit of the Station