Cisco 1538 series Installation Manual page 9

Overview of the Cisco 1538 Hub Manager
The Cisco 1538 Hub Manager (hereafter referred to as the hub manager) is a web-based
graphical user interface for basic hub configuration and monitoring. Using the hub
manager, you can configure and monitor the hub from anywhere on your intranet.
Each hub manager page
•
Provides fields, check boxes, and lists for changing the configuration settings
•
Displays current information about the hub
•
Provides online help for each page
— Detailed information about the fields, lists, check boxes, and buttons
— Specific procedures for performing management tasks
To use the hub manager, you must have one of these web browsers installed on your
management station:
•
Netscape Communicator 4.03 or higher
•
Microsoft Internet Explorer 4.01 or higher
Management Tasks Supported on the Hub Manager
The management tasks you can perform from the hub manager can be grouped as described
in Table 1-3.
Procedures for accessing and using the hub manager are provided in
•
"Accessing the Cisco 1538 Hub Manager" section on page 2-27
•
Chapter 3, "Configuring and Monitoring from the Hub Manager"
Note
Manager," is also provided in the hub manager online help.
Information provided in Chapter 3, "Configuring and Monitoring from the Hub
Overview of the Cisco 1538 Hub Manager
Overview 1-9