Cisco 1538 series Installation Manual page 12

Management Options (Cisco 1538M Hub)
Note
SNMP request does not fail. Refer to the online help SNMP Management Page for the
correct community strings.
The SNMP manager uses information in the MIB files to perform the operations described
in Table 1-4.
Table 1-4
Operation
get-request
get-next-request
get-response
set-request
trap
1 An SNMP manager does not need the exact variable name. It sequentially searches to find the needed variable
from within a table.
1-12
Cisco 1538 Series Micro Hub 10/100 Installation and Configuration Guide
Make sure you use the correct Read and Write community strings so that your
SNMP Manager Operations
Description
Retrieves a value from a specific variable.
Retrieves a value from a variable within a table.
Reply to a get-request, get-next-request, and set-request sent by an NMS.
Store a value in a specific variable.
Send an unsolicited message from an SNMP agent to an SNMP manager
indicating that some event has occurred.
1