Rear Panel Components - Cisco 1538 series Installation Manual

Rear-Panel Components
Rear-Panel Components
Figure 1-2 shows the rear-panel ports, connectors, and LEDs for the Cisco 1538M and
Cisco 1538 Micro Hubs.
Figure 1-2 Rear-Panel LEDs and Components of the Cisco 1538M Managed Hub
Power receptacle
Lock Connect power cord
slot to this receptacle.
RATING
100-127 /200-240 V~
0.3A / 0.2 50/60 Hz
Stacking ports
The UP connector connects to
upstream hub DOWN connector.
The DOWN connector connects
to downstream UP connector.
Hub port status
Solid green—Link is established at 100 Mbps.
Off—Link is established at 10 Mbps or no link.
1-4
Cisco 1538 Series Micro Hub 10/100 Installation and Configuration Guide
Cisco 1538M
UP
100BaseTX
DOWN
1x 2x 10/100
SPEED LED
ON
10BaseTX OFF
1 2 3 4
5 6 7 8
5x 6x
MDI MDI -X
Hub ports, 1X through 8X (RJ-45)
Use 10BaseT or 100BaseTX Ethernet
straight-through cables to connect
network devices.
MDI/MDI-X button for port 5
OUT (default)—Connect 10BaseT or
100BaseTX PC, workstation, router, or
server with straight-through Ethernet
cable.
IN—Connect another Cisco hub.
Console port
3x 4x
7x 8x
CONSOLE