Initial Configuration - ShoreTel VPN Concentrator 4500 Installation And Configuration Manual

Chapter 1:
1.2.2.5

Initial Configuration

You can configure the 5300 using a web browser such as Internet Explorer or Netscape
Navigator. The VPN Concentrator 5300 is shipped with the pre-configured IP address
192.168.1.1 for the LAN ports.
To connect to the 5300, follow these steps:
1. Assign static IP address 192.168.1.2 with subnet 255.255.255.0 to the Ethernet
interface of the computer that is connected to the LAN port of the 5300
2. Launch a web browser on the computer and enter the following URL: http://
192.168.1.1. Press Return and the following login window should appear:
3. Enter the username as "root" and the password as "default" to log into the system.
4. The "System" configuration page should appear now.
5. Select Network from the "Configuration Menu".
6. Perform the following steps in the "
— Choose "Static IP Address"
— Set the "IP Address:" to an IP address that is within the subnet of your firewall's
— Set the "Subnet Mask:"
7. Perform the following steps in the "
— Set the "Default Gateway" to the upstream router's IP address.
— Set the "Primary DNS Server" and "Secondary DNS Server" to the primary and
8. Perform the following steps in the "
— Set the "IP Address:" to an IP address that can be reached from the LAN network.
— Set the "Subnet Mask:"
9. Click the "Submit" button to make the above changes current.
10. Detach the Ethernet cable from the computer's Ethernet interface and connect it to a
hub or Ethernet switch connecting to the LAN network.
11. Launch a web browser on any computer on the LAN network and enter the LAN IP
address of the 5300. Press Return and log into the system as explained above.
12. Start configuring the system following the information in
VPN Concentrator Installation and Configuration Guide
DMZ. Note: The IP address may be a private IP address.
secondary DNS servers respectively.
WAN Interface Settings:" section:
Network Settings:" section:
LAN Interface Settings:" section:
Chapter
Hardware Installation
3.
11