Resuming Operation - Panasonic Toughbook CF-71 Series Reference Manual

Suspend/Hibernation Functions
CAUTION
At the "beep*" sound, release your finger from the sleep switch. If you con-
tinue to press down on the switch and hold it for more than four seconds, the
"beep*" sound will come out again and the power will go off. Data not previ-
ously saved will be lost.
Slide the power switch to power on. The power will not go on by pressing the
sleep switch.
Even when [When I press the sleep button on my computer] is set to [Shut-
down] with [Control Panel] - [Power Management], if the sleep switch is pressed,
a beep will sound and the power will go off if the switch is pressed for more
than four seconds, although the computer will not completely shut down.
* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker]
with the Setup Utility (
there will be no beep sound.
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode be used instead of the suspend mode.
NOTE
With the method below, you can shut down the computer by using the suspend
function.
Fn + F7 ( page
In [Start] - [Shut Down], select [Stand by].

Resuming Operation

Push the sleep switch
or
Slide the power switch
If the security indicator (
CAUTION
When a password has been set in the Setup Utility,
when the computer resumes from the hibernation mode, but
does not appear when the computer resumes from the suspend
mode.
When the computer enters the suspend or hibernation mode by the closing of the
LCD panel, it will resume when the LCD panel is opened. If the computer does not
resume when the LCD panel is opened, press the sleep switch or the power switch.
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use
the suspend or hibernation functions again during this time, as this may sub-
sequently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC
Cards may not function properly. In such cases, you will need to restart your
computer or reinitialize the individual devices.
page 36) or by the key combination Fn + F4 ,
2)
) is displayed, your password has been set.
7
appears