Using An External Display - Panasonic Toughbook CF-71 Series Reference Manual

Using an External Display

External Display Port
1
Power off your computer
Do not shut down using the suspend* or hibernation mode.
* With Windows 98, the "Suspend" is called "Standby".
2
Connect the external display to your computer
NOTE
For more detailed information, refer to the operation manual of the
external display.
3
Turn on the external display, then turn on your computer
with the display opened
You can select either an external display, LCD or simultaneous with Fn
+ F3 (except when the computer is in the Dual-Display Mode).
In addition, you can set the display to use during start-up with the follow-
ing procedure.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
Enter
5
Press F10 , then select [Yes]
4
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change] and make the monitor settings.
( "Starting Up/Shutting Down")
( page 36)
, select [Main]
, select [Display] and press Enter
, select the display to use and press
28