Subaru 2007 B-9 Tribeca Technicians Reference Booklet page 15

2007 New Model Update
(916)
Idle speed control allows the idle speed to be changed from 500 to 2000 RPM to allow for checking
of noise and vibrations where specific engine speeds need to be duplicated.
Fuel pump control allows the fuel pump to be turned off during engine operation to remove the fuel
pressure from the fuel system. This procedure is normally done by removing or disconnecting the
fuel pump fuse or connector, allowing for the system to be opened for component replacement. A
procedure for turning on the fuel pump with the engine off is also provided. This allows the fuel to
be drained from the fuel tank after all safety and environmental concerns are addressed.
NOTE: ALWAYS CONSULT THE APPROPRIATE *SERVICE MANUAL BEFORE REMOVING
FUEL OR FUEL SYSTEMS COMPONENTS FROM THE VEHICLE.
* Refer to STIS (Subaru Technical Infromation System) *** New Feature
June 2006
2007 Subaru B9 Tribeca Page 15