Using The Hob - Venini V4GC6 User And Installation Instructions Manual

USER INSTRUCTIONS
INSTRUCTIONS FOR USE
These User Instructions should be retained for future reference and for
use by a person who is perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
V4GC6
VECG6003
V3G1WC6
VECG6004
VECG6006
VECG6007
VECG7001
VECG9002
VE0260011.2

USING THE HOB

The symbols on the Control Panel fascias show which burner the Control
Knob operates.
Dependent on the model there are two methods for igniting the burners.
1. Auto Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large
flame symbol,
the ignition spark will operate as long as the knob is pressed down..
When a flame has been established the knob can be released.
2. Manual Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large
flame symbol,
press the ignition button located on the control panel.
The ignition spark will operate as long as the button is held down. When a
flame has been established, release the button.
To regulate the flame, continue turning anti-clockwise to the required setting
between the large and small flame symbols.
To turn the burner off, turn fully clockwise.
NOTE:
When a Thermocouple Safety Device is incorporated in the appliance, it is
necessary for the knob to be continuously held down firmly for a further period
of approximately 10 seconds after the flame has been established to enable
the thermocouple to function.
The Safety Device is designed to stop the flow of gas to the burner head in
the event of a flame out situation.
6