Installation Notes - Venini V4GC6 User And Installation Instructions Manual

INSTALLATION INSTRUCTIONS

INSTALLATION NOTES

1. Cut the aperture to the dimensions shown below or use the template if printed on the
packaging.
2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening
the screws evenly (see Fig. 1 below).
HOB APERTURE DIMENSIONS
VE0260011.2 595 510 560 480
V4GC6 595 510 560 480
VECG6003 595 510 560 480
V3G1WC6 595 510 560 480
595 510 560 480
VECG6004
VECG6006 595 510 560 480
VECG6007 595 510 560 480
VECG7001 685 510 560 480
VECG9002 860 510 830 480
Fig. 1
33
33
33
33
33
33
33
33
33
9