Advertisement
Advertisement
Table of Contents
Related Manuals for Venini VECE6005
Summary of Contents for Venini VECE6005
-
Page 1: Electric Hobs
ELECTRIC HOBS USER AND INSTALLATION INSTRUCTIONS... - Page 2 Dear Customer, Congratulations on purchasing your new product from Think Appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out Customer Care team on: 1800 444 357 Our Customer Care centre is there to ensure you get the most out of your appliance.
- Page 3 For future reference please record the following information which can be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ……………………. Serial Number ……………………. Date of Purchase …………………….
- Page 4 CONTENTS General Information Page 4 Warning Safety Instructions Page 5 Instructions for Use Page 6---7 Instructions for Installation Page 8--10 Technical Data Page 11...
-
Page 5: General Information
Materials that can touch food – 89/109. Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6, AS/NZS3350-1, AS/NZS3350-2-6 As Venini have a policy of continued product improvement, the right is reserved to adjust and make any modifications deemed necessary without notification. - Page 6 Venini do wish to emphasise that compliance does not remove the fact that surfaces will become hot during use and retain heat after operation. Venini advise that the appliance is not intended for use by young children and infirm persons without supervision.
-
Page 7: Instructions For Use
The following models are covered by these instructions: VSEC.2 VSEC VECE6005 VECE6008 USING ELECTRIC HOTPLATES The symbol on the control panel fascias show which hotplate the control system operates. A pilot light indicates when a hotplate is switched on... - Page 8 WARNING • Do not use commercial simmering aids as these can create excessive heat that can damage the appliance • Do not leave hotplates on without a pan or an empty pan • Be aware that hotplates will retain heat whilst cooling down •...
- Page 9 The surface of any adjacent unit must be capable of withstanding a minimum temperature rise of 85ºC. PRE-COMMISSING THE APPLIANCE When unpacked, check that the following parts are included with the appliance • Venini Instructions and Installation booklet • Adhesive sealing agent and fixing clamps & screws...
-
Page 10: Installation Notes
INSTALLATION NOTES Cut the aperture to the dimensions shown in the table below or use the template provided on the packaging. Invert the hob and apply the sealing agent provided to match the outer perimeter edge. If the sealing agent is a strip type, the protective covering must be removed from both sides. -
Page 11: Electrical Connection
The appliance must not be connected to the mains supply by means of a 10A plug and socket. MAINTENANCE During the guarantee period, in case of need all service intervention should be referred back to the Venini Service Department. Please note that intervention or repair by any unauthorised personnel will invalidate such guarantee. -
Page 12: Technical Data
Min Fuse Pr otection Reting Model VSEC 30Amp 32Amp 25Amp 32Amp VSEC.2 VECE6005 25Amp 32Amp VECE6008 25Amp 32Amp 3 x 2,5mm2 type HO5 V2V2-F <HAR>marked Mains Supply Connection Cable: NOTE: For cable connection details, see diagram on appliance base plate.