Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Venini V4GC6
Summary of Contents for Venini V4GC6
- Page 1 GAS HOBS USER AND INSTALLATION INSTRUCTIONS...
- Page 2 Dear Customer, Congratulations on purchasing your new product from Think Appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out Customer Care team on: 1800 444 357 Our Customer Care centre is there to ensure you get the most out of your appliance.
- Page 3 For future reference please record the following information which can be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ……………………. Serial Number ……………………. Date of Purchase …………………….
- Page 4 CONTENTS General Information page 4 Warning and Safety Instructions page 5 Instructions for Use pages 6–7 Instructions for Installation Pages 8–12 Technical Data Pages 12–13...
-
Page 5: General Information
GENERAL INFORMATION Please read this booklet thoroughly before you use this appliance. It is important that you understand all the control functions before commencing to cook with your new appliance. Please remember the advice and warnings shown on page 5, which is headed ‘IMPORTANT –... - Page 6 IMPORTANT NOTE – WARNING and SAFETY INSTRUCTIONS This appliance complies with all current European safety legislation and Australian Standards, however we do wish to emphasise that compliance does not remove the fact that surfaces will become hot during use and retain heat after operation. We advise that the appliance is not intended for use by young children or infirm persons without supervision.
-
Page 7: Using The Hob
USER INSTRUCTIONS INSTRUCTIONS FOR USE These User Instructions should be retained for future reference and for use by a person who is perhaps unfamiliar with the appliance. The following models are covered by these instructions: V4GC6 VECG6003 V3G1WC6 VECG6004 VECG6006... -
Page 8: Helpful Hints
USER INSTRUCTIONS HELPFUL HINTS Abnormal Operation Any of the following are considered to be abnormal operation and may require servicing: Yellow tipping of the burner flame. Sooting up of cooking utensils. Burners not igniting properly. Burners failing to remain alight. Burners extinguished by cupboard doors. -
Page 9: Instructions For Installation
INSTALLATION INSTRUCTIONS INSTRUCTIONS FOR INSTALLATION This appliance shall be installed only by authorised personnel and in accordance with the manufacturer's installation instructions, local gas fitting regulations, municipal building codes, water supply regulations, electrical wiring regulations, AS 5601/AG 601 - Gas Installations and any other statutory regulations. -
Page 10: Installation Notes
4. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening the screws evenly (see Fig. 1 below). Fig. 1 HOB APERTURE DIMENSIONS VE0260011.2 595 510 560 480 V4GC6 595 510 560 480 VECG6003 595 510 560 480 V3G1WC6 595 510 560 480... -
Page 11: Ventilation Of Rooms
INSTALLATION INSTRUCTIONS VENTILATION OF ROOMS The room in which this appliance is installed must be well ventilated by natural or mechanical means, or a combination of both to ensure correct combustion and the removal of spent air. The minimum quantity of air for combustion will depend on the room volume, number of appliances and their total power rating. -
Page 12: Gas Flow Adjustment
INSTALLATION INSTRUCTIONS GAS FLOW ADJUSTMENT In order to adjust the minimum gas flow proceed as follows: Ignite the burner and turn down to the minimum setting. Remove the control knob from the gas tap. Adjust the flow either clockwise to decrease or anti-clockwise to increase the flame. Use a screwdriver inserted down the gas tap rod or via the screw head adjacent to the rod for models fitted with a Flame Supervision Device. -
Page 13: Electrical Connection
INSTALLATION INSTRUCTIONS ELECTRICAL CONNECTION Before connecting the appliance, make sure the supply voltage marked on the rating Plate corresponds with the mains supply voltage. WARNING – THIS APPLIANCE MUST BE EARTHED Ensure the appliance is plugged into a 10 amp GPO. IMPORTANT The wires in the main supply lead are coloured in accordance with the following code:- Green and Yellow... -
Page 14: Maintenance
INSTALLATION INSTRUCTIONS MAINTENANCE WARNING: SERVICING SHOULD BE CARRIED OUT ONLY BY AUTHORISED PERSONNEL During the guarantee period, in case of need all service intervention should be referred back to the Service Department. Please note that intervention or repair by any unauthorised personnel will invalidate such guarantee, Before carrying out any maintenance, disconnect the appliance from the gas and electricity supplies. - Page 15 NATURAL GAS BURNER TYPES AND POWER INPUTS : MJ/h Model Large Medium Small Fish Total VE0260011.2 11.9 29.9 VGC6 11.9 29.9 VGCWS6 12.7 30.7 V4GC6 11.9 29.9 V3G1WC6 12.7 30.7 VECG6003 11.9 29.9 VECG6006 11.9 29.9 VECG6004 12.7 30.7 VECG6007 12.7...