Power Cord Stowage - Invacare Carroll CS User Manual

The pendant can also be attached to the
back of either side of the Head end
On the other side of the bed, remove the
cap from the Y cable housing. Replace
the cap on the other side of the bed.

Power Cord Stowage

Disconnect the main power cable from the wall outlet and store the power cord when the bed
NOTE
is not in use.
Secure the power cord to the back of
the head end with the Velcro® strap
when moving the bed.
1-150-068-A CS Bed Manual.doc
To move the pandant to the other side
of the bed, disconnect the main power
then unscrew the coupling cap on the
pendant cable.
Align arrows then insert the pendant
cable end into the Y cable housing.
© Carroll Healthcare Inc.
Bed Function
Remove the cable end from the Y cable
housing.
Screw the coupling cap to the threaded
Y cable housing end.
Page 23 of 35