Advertisement
Cleaning and Maintenance
Before you clean or maintain the wireless device, stop all applications using
the wireless device and remove your wireless device from your PC.
Clean your wireless device with a piece of soft antistatic cloth.
If the wireless device or any of its accessories does not work, turn to an
authorized service center for help.
Environmental Protection
Observe the local regulations regarding the disposal of your packaging materials,
old wireless device and its accessories. Please promote their recycling.
SIM/USIM Cards
While inserting or removing the SIM card, protect yourself against electrostatic
discharge (ESD). Do not touch the connector of the SIM card. As a precaution,
always make sure that the wireless device is already in your hand before you insert
or remove the SIM card.
Restart on ESDs
Software will attempt to re-initialize a connection once a substantial electrostatic
discharge causes the device to reset. If the software is not operational after an ESD,
restart the software application.
Agency/Regulatory Information
The wireless device is approved for use in many regions of the world. In these
regions, the device meets all radio frequency exposure requirements. The following
approvals and notices apply in specific regions as noted.
CE Approval (European Union)
The wireless device is approved to be used in the member states of the EU. KPN
declares that the wireless device is in compliance with the essential requirements
and other relevant provisions of the Radio and Telecommunications Terminal
Equipment Directive 1999/5/EC (R&TTE Directive).
MIM802 Quick Start Manual, V1.0
Page 10 of 14
Advertisement
