DeWalt D28410 Operator's Manual
Hide thumbs
Also See for D28410:
- Original instructions manual (96 pages) ,
- User manual (12 pages) ,
- Manual (216 pages)
Related Manuals for DeWalt D28410
Summary of Contents for DeWalt D28410
- Page 1 D28410 D28411 D28413 D28414 D28421 D28422 D28423 D28432C D28750 www.
- Page 2 Copyright D WALT...
- Page 3 Figure 1...
- Page 4 Figure 2 Figure 3 Figure 4 Figure 5...
- Page 5 Figure 6 Figure 7 Figure 8 Figure 9...
-
Page 6: Technical Data
EN GLI SH ANGLE GRINDERS D28410, D28411, D28413, D28414, D28421, D28422, D28423, D28432C, D28750 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. -
Page 7: Defi Nitions: Safety Guidelines
EN GL IS H D28410 D28411 D28413 D28414 D28421 Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a surface grinding m/s² h,AG Uncertainty K = m/s² Vibration emission value a disc sanding m/s² ≤ 2.5 –... -
Page 8: Ec Declaration Of Conformity
2) ELECTRICAL SAFETY Power tool plugs must match the outlet. Never modify the plug in any way. Do D28410, D28411, D28413, D28414, D28421, D28422, not use any adapter plugs with earthed D28423, D28432C, D28750 (grounded) power tools. Unmodified plugs... -
Page 9: Additional Specific Safety Rules
EN GL IS H Remove any adjusting key or wrench be performed. Use of the power tool for before turning the power tool on. A operations different from those intended wrench or a key left attached to a rotating could result in a hazardous situation. part of the power tool may result in personal 5) SERVICE injury. -
Page 10: Further Safety Instructions For All Operations
EN GLI SH g) Wear personal protective equipment. FURTHER SAFETY INSTRUCTIONS Depending on application, use face FOR ALL OPERATIONS shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing Causes and Operator Prevention protectors, gloves and workshop apron of Kickback capable of stopping small abrasive or workpiece fragments. -
Page 11: Safety Warnings Specifi C For Grinding And Abrasive Cutting-Off Operations
Operations forces applied to these wheels may cause them to shatter. (D28410, D28413, D28422 only) d) Always use undamaged wheel flanges a) Do not use excessively oversized sanding that are of correct size and shape for your disc paper. -
Page 12: Residual Risks
Side handle – Risk of personal injury due to prolonged use. INTENDED USE – Risk of dust from hazardous substances. The D28410, D28411, D28422 heavy-duty angle Markings on Tool grinders have been designed for professional grinding, cutting and polishing applications. -
Page 13: Assembly And Adjustments
When using the D28410, D28411, D28413, Attaching Side Handle (fi g. 6, 7) D28414, D28421, D28422, D28423, D28432C or the D28750 grinder for cutting metal or masonry WARNING: Before using the tool, a Type 1 guard MUST be used. -
Page 14: Prior To Operation
EN GLI SH WARNING: To reduce the risk CAUTION: If the guard cannot be of serious personal injury, turn tightened by the adjusting screw, do tool off and disconnect tool from not use the tool. To reduce the risk of power source before making any personal injury, take the tool and guard adjustments or removing/installing... -
Page 15: Maintenance
EN GL IS H To engage the lock, depress the spindle lock button and rotate the spindle until you are unable to rotate the spindle further. Lubrication Metal Applications Your power tool requires no additional lubrication. When using the tool in metal applications, make sure that a residual current device (RCD) has been inserted to avoid residual risks caused by metal swarf. - Page 16 EN GLI SH Local regulations may provide for separate collection GUARANTEE of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. WALT is confident of the quality of its products and offers an outstanding guarantee WALT provides a facility for the collection and for professional users of the product.
- Page 17 EN GL IS H GRINDING AND CUTTING ACCESSORY CHART Guard Type Accessory Description How to Fit Grinder Depressed centre grinding disc TYPE 27 Type 27 guard GUARD Flap wheel Backing flange Wire wheels Type 27 depressed centre wheel Threaded clamp nut Wire wheels with threaded Type 27 guard...
- Page 18 EN GLI SH GRINDING AND CUTTING ACCESSORY CHART (cont.) Guard Type Accessory Description How to Fit Grinder Masonry cutting disc TYPE 1 Type 1 guard GUARD Metal cutting disc Backing flange Diamond Cutting wheel cutting wheels Threaded clamp nut Polishing GUARD bonnet...
- Page 20 Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...