Charging By Car Charger; Install The Car Mount System; Main Function Introduction; Starting Up - Modecom FreeWAY MX User Manual

PERSONAL NAVIGATION DEVICE
- Plug the adapter's DC port into the device's USB port on its right-side panel
- Plug the adapter into the main supply socket.
- The charging indicator will light. When the unit is fully charged, the red indicator will
turn green.

2.2 Charging by Car Charger

port of the FreeWAY MX and the other end into the car's cigarette lighter.

2.3 Install the Car Mount System

II. Main function introduction

1. Starting up

Press the Power button to power on the device, then you will enter into the Main Manu
interface.
www.modecom.eu
6
The car charger supplies power to your device
when you are using the device in a car.
Caution: To protect your device against sud-
den surges in current, connect the car charger
only after the car engine has been started.
Plug the car charger's USB plug into the USB
Take off the protected fi lm on the bottom of
the suction mount, then choose a right pla-
ce on the windscreen or side window. Make
sure that the area where the suction mount
will be fi xed is clear. Caution: Never place the
stand where the driver's fi eld of vision is
blocked.