Technical Specifications; Troubleshooting - TTS Easi-Speak Pro User Manual

Technical Specifications

Records directly into MP3 or WAV file format.
n
128MB of flash memory, up to 4 hours recording.
n
MP3: Bit rate: 128 kbps (44kHz sampling)
n
Max time: Approx 2 hours
WAV: Format: IMA ADPCM
n
Bit rate: 64 kbps (4 bits per sample)
Max time: Approx 4 hours
For maximum recording time, delete the Audacity and User manual folders
n
to give additional memory space.
Built-in 300mAH Lithium-ion Polymer battery.
n
Battery supplied partially charged (50%-90%).
n
28mm loud-speaker and microphone in the top.
n
Two stereo 3.5mm headphone sockets(green).
n
One stereo 3.5mm line-in socket ,100mV RMS Max, (pink).
n
Power consumption: 75mA standby. 100mA recording.
n
80-120mA playback (depending on volume)
Battery life approx 3 hours of recording or playback.
n
Size: 174mm long, 38mm diameter at widest point.
n
Easi-Scope Pro

Troubleshooting

Easi-Speak Pro is designed to work reliably and predictably in all normal
conditions. However, it is possible that problems may occur. Please check the
following before contacting technical support:
Problem Status LED appears to flash randomly
Solution Battery is low. Charge the battery
Problem Missing Start or End of Recording
Solution Easi-Speak automatically fades in and out of recording &
playback. Ensure you leave a second or two at start and end
Problem Files corrupt or buttons don't work
Solution Format the drive in Windows (use the FAT format, not FAT32)
Problem LED flashes Red during Record
Solution Memory is full. Delete some files
Problem Some tracks do not appear to play
Solution Try swapping between MP3 and WAV formats
Problem Status LED doesn' t come on
Solution Battery completely flat. Recharge