Useful Information - TTS Easi-Speak Pro User Manual

Useful Information

Please retain these instructions for future reference as they contain
n
important information.
Easi-Speak Pro contains a non-replaceable, rechargeable battery
n
Do not attempt to remove the battery
n
Do not allow your Easi-Speak Pro to come into contact with water or other
n
liquids
In the event of an electro-static discharge, your Easi-Speak Pro may
n
malfunction. In this case, you may need to connect to a computer to reset it
Built-in Speaker
LCD Screen
Menu Button
4-way Rocker
Switch
Microphone
Red 'Record' Button
Green 'Play' Button
On-Off Switch
USB connector cover
Easi-Scope Pro
Easi-Speak Pro Controls
There are two sets of controls which are used to control the Easi-Speak Pro
Record Play / Pause LED
Status LED
(Red ring)
Status Area
Selection Area
LCD Screen
Recording & Playing your First Track
Switch on the Easi-Speak Pro by sliding the On-Off switch until the Status LED
n
lights orange (steady or flashing), indicating it is waiting in standby.
Press and release the Record button (red ring). After a second, the Status LED
n
will change to red indicating it is recording.
Speak or sing clearly into the top of the microphone about 15cm to 30cm
n
away for at least 2 seconds.
The recording can be paused at any time by pressing the Record button
n
briefly. The Status LED will flash to show the recording has been paused.
Press the Record button again to continue recording.
When you are finished Recording, press the Record button, and hold for 2
n
seconds. To stop the recording and save it as the last track. The Status LED
will change to orange (steady or flashing).
Play / Pause LED
(Green ring)
Menu Key
Vol +
Next
Vol -
Prev
4-way Rocker