Related Manuals for TTS Easi-Speak PRO
Summary of Contents for TTS Easi-Speak PRO
- Page 1 ™ Please Read All Instructions Carefully Before Using User Guide Version 5 Primary ICT Ltd - www.primaryict.co.uk...
- Page 2 Easi-Speak PRO contains a non-replaceable, • rechargeable battery Do not attempt to remove the battery • Do not allow your Easi-Speak PRO to come into • contact with water or other liquids In the event of an electro-static discharge, your •...
- Page 3 Easi-Speak PRO User Guide NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 4 Easi-Speak PRO User Guide Know Your Easi-Speak PRO Microphone Built-in Speaker Status LED LCD Screen Red ‘Record’ Menu Button Button Green ‘Play’ Button 4-way Rocker Switch USB connector cover On-Off Switch Primary ICT Ltd - www.primaryict.co.uk...
- Page 5 Easi-Speak PRO User Guide Easi-Speak Controls There are two sets of controls which are used to control the Easi-Speak PRO Status Record Play / Pause (Red ring) (Green ring) Menu key Vol + Status area Prev Next Selection Vol -...
- Page 6 Easi-Speak PRO User Guide Recording & Playing your First Track • Switch on the Easi-Speak PRO by sliding the On-Off switch until the Status LED lights Orange (steady or flashing), indicating it is waiting in standby • Press and release the Record button (Red ring). After a...
-
Page 7: Status Led
• The Easi-Speak PRO will not store recordings of less than 2 seconds, so ensure you record for longer than this • Please note that the Easi-Speak Pro can only store a maximum of sixty two tracks, regardless of the length of track. -
Page 8: Fast Forward & Reverse
Easi-Speak PRO User Guide • Steady Orange: Ready to Play/Record WAV file • Steady Green: Playing (or fully charged) • Flashing Green: Playing Paused • Steady Red: Recording • Flashing Red: Recording Paused • Flashing Red/Green: Charging • Flashing Orange/Green: Battery low Pausing or Stopping a Track •... -
Page 9: Charging The Battery
USB port of an active computer or the charger. No software is required: • Connect Easi-Speak PRO to the USB port or charger • The Status LED will flash Red and Green (or Orange if connected to the separate charger) •... -
Page 10: Using The Menu System
• A complete charge of a fully discharged battery will take about 4 hours Using the Menu System The LCD on the Easi-Speak PRO provides a multi-level menu system that allows you to select certain configurations, manage the sound files and select recording and playback functions. - Page 11 Easi-Speak PRO User Guide Playback Screen During playback, the central part of the screen shows the name of the track currently playing. playing track 1 of 24 now 6 seconds into a 39 second track playing track playing is paused...
-
Page 12: Config Menu
Easi-Speak PRO User Guide recording track recording is paused battery 50% full Config Menu Selecting the item from the standby screen, displays a menu of configuration settings: Recording mode: MP3 or WAV Backlight Defines the length of time backlight is on after the last keypress. - Page 13 • Remove the end cap covering the USB connector, by pulling off, and switch off the Easi-Speak PRO • Plug the Easi-Speak PRO into an available USB socket • The first time Easi-Speak PRO is connected to the PC, it will automatically install the drivers and may...
- Page 14 It is available for Mac OS/X, Microsoft Windows, GNU/Linux and other operating systems • Connect Easi-Speak PRO to the PC or Mac and browse to the Audacity folder (contains release 1.2.6) audacitywin.exe • For Windows, run the file audacitymac.dmg...
-
Page 15: Technical Specification
Easi-Speak PRO User Guide Technical specification • Records directly into MP3 or WAV file format • 128MB of flash memory, up to 4 hours recording • MP3: Bit rate: 128 kbps (44kHz sampling) Max time: Approx 2 hours • WAV: Format:... -
Page 16: Troubleshooting
Easi-Speak PRO User Guide Troubleshooting Easi-Speak PRO is designed to work reliably and predictably in all normal conditions. However, it is possible that problems may occur. Please check the following before contacting technical support: Problem Status LED appears to flash randomly Solution Battery is low. -
Page 17: Support And Warranty
The battery is not user replaceable. All out of warranty repairs will be subject to a replacement fee. Please visit www.tts-group.co.uk for latest product information. Email feedback@tts-group.co.uk for technical support. TTS Group Ltd... - Page 18 Easi-Speak PRO User Guide Educational Software, Inc TTS Group Ltd 310 Barnstable Road Park Lane Business Park, Suite 101, Unit A & B Kirkby-in-Ashfield, Hyannis, MA 02601 Nottinghamshire, NG17 9LE +1 508 862 0700 United Kingdom +44(0)800 318 686 This device complies with Part 15 of the FCC Rules.