[b] Auxiliary code V-2 and later
1) Unplug the ice dispenser.
2) Remove the front panel.
3) Disconnect the three connectors from the control box.
4) Remove the four screws securing the control box, and remove the control box.
5) Remove the two screws securing the cover.
6) Replace the applicable parts.
7) Assemble the removed parts in the reverse order of which they were removed.
Note: Check that the connectors are securely connected.
Power Transformer
(Transformer-1)
Power Relay
Controller Board
Fig. 11
53
Fuse Holder
(250V/5A Fuse)