How To Get A License; Get A 30 Day Evaluation License; Get A Full Loadmaster License; Get Full High Availability Loadmaster Cluster Licenses - KEMP Technologies LoadMaster 1500 Installation And Configuration Manual

Hint: To enable a syslogd process on a remote Linux server to receive syslog messages from the LoadMaster,
the syslogd must be started with the "-r" flag.

2. How to get a license

After boot, a login prompt appears; login as 'bal' (password '1fourall').
To unlock the LoadMaster software you need a license key. The license key will be generated individually for
each single LoadMaster instance in conjunction with a hardware dependent Access Code.
There are three different licenses that you can get for your LoadMaster:
a) An evaluation license. This is a fully functional license valid for up to 30 days.
b) A full, non time-limited LoadMaster license.
c) A full, non time-limited license for a LoadMaster High Availability (HA) cluster consisting of two machines.
An evaluation license can be upgraded to either a full single or a full HA license.

2.1. Get a 30 day evaluation license

1. Using a null modem cable connect a PC using terminal emulation software from its COM+ port to the
LoadMaster COM+ port (COM+ settings should 115200,8,N,1). After boot, a login prompt appears; login as
'bal' (password '1fourall'), and your Access Code will be displayed on the screen.
2. If not already provided contact your KEMP Technologies Representative to obtain evaluation license. Be
sure to provide the Access Code (or codes if HA), so the evaluation license can be "mapped" to the unit(s).
Customer contact should have provided KEMP with a valid email address to send license to Customer contact.

2.2. Get a full LoadMaster license

1. A service agreement upon purchase must be approved by KEMP in order to obtain a full LoadMaster
appliance.
2. Using a null modem cable connect a PC using terminal emulation software from its COM+ port to the
LoadMaster COM+ port (COM+ settings should 115200,8,N,1). After boot, a login prompt appears; login as
'bal' (password '1fourall'), and your Access Code will be displayed on the screen.
3. If not already provided contact your KEMP Technologies Representative to obtain evaluation license. Be
sure to provide the Access Code (or codes if HA), so the evaluation license can be "mapped" to the unit(s).
Customer contact should have provided KEMP with a valid email address to send license to Customer contact.

2.3. Get full High Availability LoadMaster cluster licenses

1. A service agreement upon purchase must be approved by KEMP in order to obtain a full LoadMaster HA
license.
2. Using a null modem cable connect a PC using terminal emulation software from its COM+ port to the
LoadMaster COM+ port (COM+ settings should 115200,8,N,1). After boot, a login prompt appears; login as
'bal' (password '1fourall'), and your Access Code will be displayed on the screen.
3. If not already provided contact your KEMP Technologies Representative to obtain evaluation license. Be
sure to provide the Access Code (or codes if HA), so the evaluation license can be "mapped" to the unit(s).
Customer contact should have provided KEMP with a valid email address to send license to Customer contact.
Note: TPS Limits for SSL acceleration (100 default, 400, 700, 1000) will be determined upon service
agreement. Please contact you KEMP representative for more information and pricing.
Note: The License Keys and Access Codes are NOT interchangeable between machines.
Copyright © 2000 - 2005 KEMP Technologies, Inc. All Rights Reserved. 30