BIOS Setup
BIOS Setup
Power Management Setup
▶
ACPI Function
This item is to activate the ACPI (Advanced Configuration and Power Management
Interface) Function. If your operating system is ACPI-aware, such as Windows 98SE/
2000/ ME/ XP, select [Enabled].
▶
EuP 2013
This item is used to reduce the power consumption in ACPI S5 state.
▶
Restore On AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off]
[On]
[Last State]
▶
Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
3-12
Always leaves the computer in the power off state.
Always leaves the computer in the power on state.
Restore the system to the status before power failure or interrupt
occurred.